Put a lineup board on a screen
Pair a TV, phone or tablet with a code, or use a kiosk link, an installed app or a browser source, so a board fills the screen edge to edge and comes back after every restart.
Each screen shows one board. Make the board first in Settings › Lineup board › Boards, then put it on screens from On screens. Under Put a board on a screen, pick the Board and how the screen shows it: Pair a screen (recommended), Signage player, Install as an app or LED walls and video.
Before you start
- A board exists. With none, On screens says Make a board first.
- You're signed in as an owner, admin or stage manager, and the show is saved to the cloud.
- The screen runs Setclock Screen, or has Chrome or Edge 111 or newer or Safari 16.4 or newer. Many smart-TV built-in browsers are too old: plug in a streaming stick.
Pair a screen
1. Get the code on the screen
Install Setclock Screen from the Amazon Appstore and open it.
The screen shows Pair this screen with Setclock and a 6-character code.
Install Setclock Screen from Google Play and open it. It works on Google TV and Android TV.
The screen shows Pair this screen with Setclock and a 6-character code.
Install Setclock Screen from Google Play and open it.
For a screen on a wall or a stand, tap Open by itself when it asks; on a personal device, Not now.
The screen shows a 6-character code.
Install Setclock Screen from the App Store (iOS or iPadOS 26 or later) and open it.
The screen shows Pair this screen with Setclock and a 6-character code.
Open setclock.app/pair in the screen's browser.
The screen shows Pair this screen with Setclock and a 6-character code.
Codes last 15 minutes and work once. More on each device in Pair a TV, phone or tablet.
2. Add the screen in Setclock
Open the show's Settings › Lineup board › On screens. From Screens, Pair a screen under Lineup boards opens the same place.
Choose Pair a screen, then press Add a screen.
Type the code in Code on the screen.
Give it a Name, like Bar 2 TV, and pick the Board.
Press Pair screen. Within a few seconds the screen shows the board, with Paired · and the board's name across the top for 10 seconds.
Press OK on the remote, or tap the screen, for full screen.
Other ways
- Signage player: press Create link, then Copy link or Show QR code, and paste the kiosk link into BrightSign, Yodeck, ScreenCloud, Xibo, Fully Kiosk Browser or any player with Chrome 111 or newer. Reset link makes a new one; screens on the old link stop within a minute.
- Install as an app: open setclock.app/pair in Chrome or Edge on a computer or Android box, choose Install (it's called Setclock Screen), pair it with Add a screen and add it to the start-up apps.
- LED walls and video: run a mini PC with the kiosk link into the LED processor over HDMI, with the board size set to the wall's pixel map and Exact pixels on. Or add the kiosk link as a browser source in OBS or vMix, named as the page shows (SETCLOCK-BOARD and the board's name), and send it over NDI.
Anyone with a kiosk link sees the board, the same as walking past the screen.
Display options
Under Display options for each board: Exact pixels (1 board pixel to 1 screen pixel, for LED processors), Safe margin for older TVs (everything 5% in from the edges) and Fresh start each day (a quiet reload at the day switch). Show test pattern checks cropping and alignment. On every board the cursor is hidden and the screen stays awake.
Manage connected screens
- Connected screens lists paired and kiosk-link screens with Online, Slow to answer, Offline · seen or Not seen yet.
- Rename a paired screen in place, or pick another board in its list to move it within seconds. Identify shows a big number on it for 20 seconds.
- Unpair, then Tap again to unpair, sends it back to a pairing code. A kiosk-link screen is cut off only by resetting the link. Deleting a board turns its paired screens off.
On a TV, hold OK for 2 seconds or press Menu for Screen diagnostics, with Reload screen. More in Keep screens running all night.
If it doesn't work
Type the 6 letters and numbers from the screen, like K7Q 42M.
The code is incomplete or has a character codes never use (I, L, O, 0 or 1).
That code didn't work. Codes work once and change every 15 minutes: check the screen for its current code.
Type the code the screen shows now. See A pairing code isn't accepted.
Too many tries for now. Wait an hour, or contact Setclock support.
Pairing pauses after 10 wrong codes in an hour from one person, or 50 in one organization.
Lineup boards are part of the Festival plan, for show editors.
Your role is viewer, or the organization isn't on the Festival plan.
This browser is too old for Setclock boards. Use a streaming stick, a computer or a newer signage player.
The screen's browser is older than Chrome 111 or Safari 16.4. Use Setclock Screen on a streaming stick instead.
The screen says Not active yet
The show is waiting to be made active. See A screen says "Not active yet".